Veterinary sanitary assessment of mutton after application of antihelminth feed additive with albendazole

Abstract This study assessed the anthelminthic feed additive albendazole effect on the main indicators of the quality of sheep meat obtained from infected and deworming animals. A total of 20 heads of Akzhaik meat and wool sheep (i.e. 2 years of age, of different sex) were used in a 20-day experiment and 2 groups of 10 heads were formed (n = 4). The sheep were fed with the basic diet (i.e. control, group CON), without adding anything, and the second group was fed the basic diet orally with the addition of a dose of 1.2 g / head (an experimental group). At the end of the experiment, a control slaughter was carried out from each group in order to study the biochemical composition of meat and its quality. The anthelmintic feed additive albendazole did not have a significant effect on the indicators (organoleptic and physicochemical) of meat quality (P> 0.04). However, the ratio of fat and ash in the meat of the control group has differences in indicators and is reduced by 24.81% and 0.03%, respectively. The drug had a significant effect on the biological value of meat in the experimental group, where there is a higher content of essential amino acids (P = 0.06), nonessential (P = 0.05) concentrations in comparison with the CON groups. The results obtained show that the meat of the experimental groups of sheep, when using the anthelminthic feed additive albendazole, did not have a significant effect on organoleptic parameters, but significantly positively influenced the metabolism, live weight gain and biological value of meat.

Resumo Este estudo avaliou o efeito do aditivo anti-helmíntico albendazol sobre os principais indicadores de qualidade da carne ovina obtida de animais infectados e desparasitados. Um total de 20 cabeças de carne Akzhaik e ovelhas de lã (ou seja, 2 anos de idade, de sexo diferente) foi usado em um experimento de 20 dias e dois grupos de 10 cabeças foram formados (n = 4). As ovelhas foram alimentadas com dieta básica (ou seja, controle, grupo CON), sem adicionar nada, e o segundo grupo foi alimentado com dieta básica por via oral com a adição de uma dose de 1,2 g / cabeça (um grupo experimental). Ao final do experimento, foi realizado um abate controle de cada grupo para estudar a composição bioquímica da carne e sua qualidade. O aditivo anti-helmíntico albendazol não teve efeito significativo sobre os indicadores (organolépticos e físico-químicos) de qualidade da carne (P > 0,04). No entanto, a proporção de gordura e cinzas na carne do grupo de controle tem diferenças nos indicadores e é reduzida em 24,81% e 0,03%, respectivamente. A droga teve efeito significativo sobre o valor biológico da carne no grupo experimental, onde há maior teor de aminoácidos essenciais (P = 0,06), concentrações não essenciais (P = 0,05) em comparação com os grupos CON. Os resultados obtidos mostram que a carne dos grupos experimentais de ovinos, ao utilizar o aditivo anti-helmíntico albendazol, não teve efeito significativo nos parâmetros organolépticos, mas influenciou positivamente de forma significativa no metabolismo, ganho de peso vivo e valor biológico da carne.

Veterinary sanitary assessment of mutton after application of antihelminth feed additive with albendazole / Avaliação sanitária veterinária de carneiro após aplicação de aditivo anti-helmíntico com albendazol

Abstract This study assessed the anthelminthic feed additive albendazole effect on the main indicators of the quality of sheep meat obtained from infected and deworming animals. A total of 20 heads of Akzhaik meat and wool sheep (i.e. 2 years of age, of different sex) were used in a 20-day experiment and 2 groups of 10 heads were formed (n = 4). The sheep were fed with the basic diet (i.e. control, group CON), without adding anything, and the second group was fed the basic diet orally with the addition of a dose of 1.2 g / head (an experimental group). At the end of the experiment, a control slaughter was carried out from each group in order to study the biochemical composition of meat and its quality. The anthelmintic feed additive albendazole did not have a significant effect on the indicators (organoleptic and physicochemical) of meat quality (P> 0.04). However, the ratio of fat and ash in the meat of the control group has differences in indicators and is reduced by 24.81% and 0.03%, respectively. The drug had a significant effect on the biological value of meat in the experimental group, where there is a higher content of essential amino acids (P = 0.06), nonessential (P = 0.05) concentrations in comparison with the CON groups. The results obtained show that the meat of the experimental groups of sheep, when using the anthelminthic feed additive albendazole, did not have a significant effect on organoleptic parameters, but significantly positively influenced the metabolism, live weight gain and biological value of meat.

Resumo Este estudo avaliou o efeito do aditivo anti-helmíntico albendazol sobre os principais indicadores de qualidade da carne ovina obtida de animais infectados e desparasitados. Um total de 20 cabeças de carne Akzhaik e ovelhas de lã (ou seja, 2 anos de idade, de sexo diferente) foi usado em um experimento de 20 dias e dois grupos de 10 cabeças foram formados (n = 4). As ovelhas foram alimentadas com dieta básica (ou seja, controle, grupo CON), sem adicionar nada, e o segundo grupo foi alimentado com dieta básica por via oral com a adição de uma dose de 1,2 g / cabeça (um grupo experimental). Ao final do experimento, foi realizado um abate controle de cada grupo para estudar a composição bioquímica da carne e sua qualidade. O aditivo anti-helmíntico albendazol não teve efeito significativo sobre os indicadores (organolépticos e físico-químicos) de qualidade da carne (P > 0,04). No entanto, a proporção de gordura e cinzas na carne do grupo de controle tem diferenças nos indicadores e é reduzida em 24,81% e 0,03%, respectivamente. A droga teve efeito significativo sobre o valor biológico da carne no grupo experimental, onde há maior teor de aminoácidos essenciais (P = 0,06), concentrações não essenciais (P = 0,05) em comparação com os grupos CON. Os resultados obtidos mostram que a carne dos grupos experimentais de ovinos, ao utilizar o aditivo anti-helmíntico albendazol, não teve efeito significativo nos parâmetros organolépticos, mas influenciou positivamente de forma significativa no metabolismo, ganho de peso vivo e valor biológico da carne.

Solutions based on three-dimensional technologies for the practice and teaching of biomedical sciences

Introduction: Three-dimensional printing is one of the technologies that promote change at an economic and social level, and one of the fundamental elements of industry 4.0. It has enormous potential for the future of medicine, establishing itself as a new paradigm. Despite its advantages, its use in our environment is incipient. Objective: To design and develop solutions based on three-dimensional technologies for the teaching and practice of biomedical sciences. Materials and methods: A technological development investigation was carried out between the Center for Assisted and Sustainable Manufacturing of the University of Matanzas and Matanzas University of Medical Sciences, between September 2019 and July 2022. The designs and fabrications were made from the acquisition of computed tomography images, or from a surface scanner, which were then processed, converted into Standard Tessellation Language format, printed, and post-processed. Virtual designs were developed using computer-aided design software. Results: Various solutions were developed including prototypes: biomodels for craniosynostosis repair and anatomical figures, custom cranial prosthesis mold, hand prosthesis, O2 line splitters, tissue scaffolds, syringe gun, face shields, breast prosthesis; autologous restoration mold and tissue expander. Conclusions: In all areas of application of this technology in medicine―except the printing of medicines, in the current context―, it is feasible to obtain solutions in the territory of Matanzas. It is therefore imperative that managers and the medical community in general, begin to acquire awareness, knowledge, and experience to ensure the optimal use of this technology.

Introducción: La impresión tridimensional es una de las tecnologías que promueve el cambio a nivel económico y social, y uno de los elementos fundamentales de la industria 4.0. Asimismo, constituye un enorme potencial para el futuro de la medicina, estableciéndose como un nuevo paradigma. A pesar de sus ventajas, su explotación en nuestro medio es incipiente. Objetivos: Diseñar y desarrollar soluciones basadas en tecnologías tridimensionales para la enseñanza y la práctica de las ciencias biomédicas. Materiales y métodos: Se realizó una investigación colaborativa, de desarrollo tecnológico entre el Centro de Fabricación Asistida y Sostenible de la Universidad de Matanzas y la Universidad de Ciencias Médicas de Matanzas, entre septiembre de 2019 y julio de 2022. Los diseños y fabricaciones se realizaron a partir de la adquisición de imágenes de tomografía computarizada, o desde un escáner de superficie, las que luego se procesaron, se convirtieron en formato Standard Tessellation Language, se imprimieron y posprocesaron. Los diseños virtuales se desarrollaron empleando un software de diseño asistido por computadora. Resultados: Se desarrollaron varias soluciones que incluyen varios prototipos: biomodelos para reparación de craneosinostosis y figuras anatómicas, molde de prótesis craneal personalizada, prótesis de mano, divisores de líneas de O2, andamios tisulares, pistola portajeringas, protectores faciales, prótesis de mama, molde para restauración autóloga y expansor tisular. Conclusiones: En todas las áreas de aplicación de esta tecnología en medicina―salvo en la impresión de medicamentos, en el contexto actual―, es factible obtener soluciones en el territorio de Matanzas. Es un imperativo, pues, que directivos y la comunidad médica en general, comiencen a adquirir conciencia, conocimientos y experiencias para garantizar la utilización óptima de esta tecnología.

Research on the influence of meteorological factors on the incidence of foodborne diseases / 公共卫生与预防医学

Objective To explore the correlation between the incidence of foodborne diseases and meteorological factors in Jinan, and to provide targeted measures for the prevention and control of foodborne diseases. Methods Data from the reporting systems of two sentinel hospitals for active surveillance of foodborne diseases from 2013 to 2021 in Jinan were collected. The meteorological data in the same period in Jinan were also collected. The generalized additive model was used to explore the nonlinear relationship between meteorological factors and the incidence of foodborne diseases, and threshold function analysis was use to perform subsection regression. Results The incidence of foodborne diseases was positively correlated with daily average temperature (rs=0.23), relative humidity (rs=0.05), and daily average wind speed (rs=0.01), and negatively correlated with daily average air pressure (rs=-0.19). Based on the GAM results and segmented regression analysis of meteorological factors, it was found that when the daily average temperature was below or above the threshold of 24.63°C, for every 1°C increase in daily average temperature, the incidence of foodborne diseases correspondingly increased by 0.04% and 0.18%. When the daily average wind speed was above the threshold of 2.26 m/s, the incidence of foodborne diseases decreased by 0.36% for every 1 m/s increase in the daily average wind speed. Conclusion Nine years of observation and data analysis have shown that meteorological factors such as daily average temperature, relative humidity, air pressure, and wind speed are related to the incidence of foodborne diseases. These findings suggest that meteorological factors may be important factors leading to foodborne diseases, which provides an important scientific basis for formulating effective prevention and control measures.

Comprensión del valor de posición: equivalencia numérica y composición aditiva como facilitadores en la escritura de numerales / Understanding Place Value: Numerical Equivalence and Additive Composition as Predictors for Writing Numerals / Compreendendo o valor posicional: equivalência numérica e composição aditiva como facilitadores na escrita de numerais

El valor de posición es una propiedad básica de los formatos de representación del Sistema de Numera- ción en Base Diez (SNBD), y su comprensión facilita el desempeño matemático de los estudiantes en diferentes grados escolares. Algunas investigaciones sugieren que nociones como la composición aditiva y la equivalencia numérica participan en la emergencia de la comprensión de este principio, sin embargo, pocos estudios han intentado analizar la relación entre estas nociones o se han interesado en indagar ­desde una perspectiva de la transcodificación numérica­, cómo estas afectan la producción de numerales arábigos durante los procesos iniciales del aprendizaje escolar. En tal sentido, esta investigación propone indagar si algunas de las invariantes del SNBD ­composición aditiva y equivalencia numérica­ facilitan la comprensión del valor de posición y la escritura numérica en estudiantes de primer grado de primaria. Participaron 96 estudiantes adscritos a escuelas públicas de Cali, Colombia, en un estudio cuasi-experimental pre-posprueba con grupo control, que involucra la aplicación de un proceso de intervención diferente para cada grupo experimental: composición aditiva y (b) equivalencia numérica. Los resultados plantean que los dos tratamientos apli- cados facilitan la comprensión del valor de posición y generan efectos diferentes en la comprensión y producción de numerales arábigos. Además, los análisis develan cambios significativos entre aplicaciones para los grupos experimentales, pero no para el grupo con- trol, lo cual sugiere que la composición aditiva y la equivalencia numérica son predictores en la escritura correcta de numerales.

The place value is a fundamental property of the base-10 system representation formats, and its under- standing facilitates the mathematical performance of children in different school grades. Some research sug- gests that notions such as additive composition and nu- merical equivalence participate in the emergence of the understanding of this principle. However, few studies have attempted to analyze the relationship between these notions or have been interested in investigating ­from a transcoding perspective numerical­ how these affect the production of Arabic numerals during the initial processes of school learning. This research explores how some invariants of the base-10 system: Additive Composition and Numerical Equivalence, facilitate the place value mastery and the numerical writing of children. First-grade students (n= 96) linked to public schools in the city of Cali, Colombia, in a quasi-experimental experimental study with a control group, which involves the application of different in- tervention processes to each experimental group: (a) numerical equivalence and (b) additive composition. The results suggest that both treatments facilitate the place value understanding and generate differ- ent effects on comprehending and producing Arabic numerals. In addition, analyses reveal significant changes between applications for the experimental groups but not for the group control, which specif- ically evidences both the additive composition and the numerical equivalence are predictors in correct number writing.

O valor posicional é uma propriedade básica dos forma- tos de representação do Sistema de Numeração Base Dez (SNBD), e sua compreensão facilita o desempenho mate- mático de alunos de diferentes séries escolares. Algumas pesquisas sugerem que noções como composição aditiva e equivalência numérica participam do surgimento da compreensão desse princípio, porém, poucos estudos têm tentado analisar a relação entre essas noções ou se interessado em investigar ­a partir de uma perspectiva de transcodificação numérica­ como essas afetam a produção de algarismos arábicos durante os processos iniciais de aprendizagem escolar. Esta investigação se propõe a investigar se alguns dos invariantes do SNBD; a composição aditiva e a equivalência numérica facilitam a compreensão do valor posicional e da escrita numérica em alunos da primeira série. Participaram do experi- mento 96 alunos da primeira série de escolas públicas de Cali, Colômbia; num estudo quase experimental pré/pós-teste com um grupo controle, que envolve a aplicação de um processo de intervenção diferen- te a cada grupo experimental; (a) composição aditiva e (b) equivalência numérica. Os resultados sugerem que os dois tratamentos aplicados facilitam a compreensão do valor posicional e geram efeitos diferentes na com- preensão e produção dos algarismos arábicos. Além disso, as análises revelam mudanças significativas entre as aplicações para os grupos experimentais, mas não para o grupo controle, o que sugere que a composi- ção aditiva e a equivalência numérica são preditores na escrita correta dos numerais.

Association between ozone pollution and daily outpatient visits for respiratory system in a district of Shanghai / 上海预防医学

ObjectiveTo analyze the effect of O3 pollution on outpatient visits for respiratory diseases in a district of Shanghai. MethodsWe collected the respiratory disease outpatient data， and atmospheric and meteorological data of from a suburban general hospital in Shanghai from 2015 to 2017. A time-series analysis by generalized additive model was conducted to examine the relationship between O3 pollution and daily outpatient visits. ResultsThe daily outpatient volume for respiratory diseases was 831. The daily 8 h median concentration of O3 was 101.04 μg·m-3. The excess relative risk was 0.461% （95%CI： 0.240%‒0.682%） at lag3. Stratified by gender and age， females， child and the aged had higher risk of respiratory diseases. In the double-pollutant model， PM2.5 and PM10 increased health effects， while CO reduced health effects. ConclusionThe increase of O3 concentration can increase the daily outpatient volume of respiratory diseases.

Association between atmospheric particulate matters and outpatient visits for respiratory disorders in Jiaxing City of Zhejiang Province from 2019 to 2021： a time series analysis / 上海预防医学

ObjectiveTo explore the effect of exposure to atmospheric particulate matters on the outpatient visits of respiratory disorders in Jiaxing City，Zhejiang Province. MethodsDaily air pollutant monitoring data，meteorological data and outpatient visits of respiratory disorders in Jiaxing City from 2019 to 2021 were collected．A generalized additive model was applied to evaluate the effect and laggeel effect of the concentrations of atmospheric particulates for outpatient visits of respiratory disorders after adjusting for secular trend， day-of-the-week effect， holiday effect， and meteorological variables. ResultsThe daily average concentrations of PM2.5， PM10， O3 and NO2 exceeded the standard， and the proportion of days exceeding the standard was 3.4%， 1.3%， 11.0% and 0.8%， respectively. Every 10 μg·m-3 increase in PM2.5 concentration showed the strongest effects on the daily outpatient visits of respiratory disorders， adult and childhood respiratory disorders all on lag07 with ER（95%CI） being 2.29%（1.35%‒3.24%）， 2.31% （1.39%‒3.23%） and 2.65 % （1.36%‒3.96%）， respectively. The maximum ER of outpatient visits for respiratory disorders in children was higher than that in adults. Every 10 μg·m-3 increase in PM10 concentration showed the strongest effects on the daily outpatient visits of respiratory disorders on lag07， adult respiratory disorders on lag06 and childhood respiratory disorders on lag07 with ER（95%CI） being 1.42% （0.87%‒1.96%）， 1.49%（0.99%‒1.99%） and 1.61% （0.87%‒2.36%）， respectively. The results of double-pollutant model showed that the effect of atmospheric particulate reduced after O3 was introduced into the model. ConclusionThere are a short-term effect and a laggeel effect of atmospheric particulate on the outpatient visits of respiratory disorders. It is necessary to strengthen the health protection of the respiratory system of the population， especially the children.

Antibacterial efficacy of chemically and plant-synthesized zinc oxide nanocomposite against Staphylococcus aureus and Escherichia coli inoculated in Tilapia fillet

Aims@#Edible coatings developed from biodegradable materials such as starch and zinc oxide nanoparticles (ZnO-NPS) are efficient antimicrobials that could be used as a food additive to reduce the bacterial load on the food surface. Therefore, this study was aimed to examine the effect of chemical and green synthesized ZnO-NPS with different concentrations on the survival of Escherichia coli and Staphylococcus aureus in fish fillets during chilling storage at 4 ± 1°C.@*Methodology and results@#ZnO-NPS were chemically prepared by mixing zinc acetate dihydrate with sodium hydroxide. Lavandula officinalis was used for the green synthesis of ZnO-NPS. The sterile biodegradable coating containing 2 and 5% of both chemically and green synthesized ZnO-NPS were made using starch, gelatin, xanthan gum and glycerol. Different bacterial cocktail strains of both E. coli and S. aureus were inoculated onto Tilapia fillet samples. The coating solution with different antimicrobials was aseptically spread in Tilapia fillets and examined periodically within two days intervals for the survival of S. aureus and E. coli during chilling at 4 ± 1 °C. Both chemically and plantsynthesized ZnO-NPS reduced the growth of both S. aureus and E. coli by about 3.7 log10 CFU/cm2 of Tilapia fillet. The incorporation of L. officinalis increased the antibacterial activity of ZnO-NPS. Staphylococcus aureus was more sensitive than E. coli for both chemically and plant-synthesized ZnO-NPS. Moreover, zinc oxide biodegradable coating extended the shelf-life of chilled Tilapia fillets by about 4 days.@*Conclusion, significance and impact of study@#The results of the current study demonstrated the incorporation of L. officinalis into ZnO-NPS biodegradable coating which may be promising in reducing microbial growth on food surfaces.

Research status and development of biodegradable zinc alloy as orthopedics implant / 生物医学工程学杂志

Znic (Zn) alloys with good cytocompatibility and suitable degradation rate have been a kind of biodegradable metal with great potential for clinical applications. This paper summarizes the biological role of degradable Zn alloy as bone implant materials, discusses the mechanical properties of different Zn alloys and their advantages and disadvantages as bone implant materials, and analyzes the influence of different processing strategies (such as alloying and additive manufacturing) on the mechanical properties of Zn alloys. This paper provides systematic design approaches for biodegradable Zn alloys as bone implant materials in terms of the material selection, product processing, structural topology optimization, and assesses their application prospects with a view to better serve the clinic.

Classification optimization of traditional Chinese medicine materials based on additive physical properties of powder / 中国中药杂志

According to the method of predicting the physical properties of oily powder based on the additive physical properties of Chinese medicinal powder, Dioscoreae Rhizoma and calcined Ostreae Concha with high sieve rate and good fluidity were mixed and crushed with Persicae Semen, Platycladi Semen, Raphani Semen, Ziziphi Spinosae Semen, and other typical oily materials with high fatty oil content in proportion to obtain 23 mixed powders. Fifteen physical properties such as bulk density, water absorption, and maximum torque force were measured, and the physical properties of typical oily powders were predicted. When the mixing and grinding ratio was in the range of 5∶1-1∶1, the r value in the correlation equation between the weighted average score of the mixed powder and the powder proportion ranged from 0.801 to 0.986, and the linearity was good, indicating that the method of predicting the physical properties of oily powder based on the additive physical properties of traditional Chinese medicine(TCM)powder was feasible. The results of cluster analysis showed that the classification boundaries of the five kinds of TCM materials were clear, and the similarity of the physical fingerprints of powdery and oily materials decreased from 80.6% to 37.2%, which solved the problem of fuzzy classification boundaries of powdery and oily materials due to the lack of representativeness of oily material model drugs. The classification of TCM materials was optimized, laying a foundation for optimizing the prediction model of the prescription of personalized water-paste pills.

Evaluation of EDM inclusion into the conventional polishing of printed Co-Cr alloy by selective laser melting / Avaliação da inclusão de EDM no polimento convencional da liga de Co-Cr impressa por fusão seletiva a laser

Objective: The selective laser melting (SLM) technique used in manufacturing results in a rougher surface that requires more satisfying processing than conventional hand-finishing operations. The electro discharge machine (EDM) has various possibilities in the adjustment of surfaces. The present study assesses whether the participation of the EDM technique with the conventional finishing and polishing methods enables surface improvement for the Cobalt-Chromium alloy fabricated by SLM. Material and Methods: Twenty discs of cobalt chromium alloy were fabricated by SLM, divided equally into two groups: (TF) control group for finishing and polishing in the conventional method in accordance with the manufacturer's recommendations; and (EF) group for conducting polishing incorporating the EDM method. Results: The EF group recorded the lowest mean value of surface roughness and the highest mean value of micro hardness compared to the TF group. Furthermore, statistically significant differences (P < 0.05) were found for surface roughness as well as micro hardness. Conclusion: Reliance of the electric discharge machine proactively within finishing and polishing procedures promotes competence in the conventional polishing method and improves the surface properties of cobalt chromium alloy printed by SLM technology (AU)

Objetivo: A técnica de fusão a laser seletiva (SLM) usada na fabricação resulta em uma superfície mais rugosa a qual requer um processamento mais satisfatório do que o acabamento manual. A máquina de eletro descarga (EDM) possui várias possibilidades no ajuste de superfícies. O presente estudo avalia se a participação da técnica EDM associada aos métodos convencionais de acabamento e polimento possibilita a melhora da superfície da liga Cobalto-Cromo fabricada através da SLM. Material e Métodos: Vinte discos de liga de cromo-cobalto foram confeccionados por SLM, e divididos igualmente em dois grupos: (TF) grupo controle, realizado acabamento e polimento pelo método convencional de acordo com as recomendações do fabricante; e (EF) grupo do polimento associado ao método EDM. Resultados: O grupo EF registrou o menor valor médio de rugosidade superficial e o maior valor médio de microdureza em relação ao grupo TF. Além disso, diferenças estatisticamente significativas (P < 0,05) foram encontradas para rugosidade superficial, assim como para a microdureza. Conclusão: A confiança na máquina de descarga elétrica proativamente nos procedimentos de acabamento e polimento promove a competência no método de polimento convencional e melhora as propriedades de superfície da liga de cromo-cobalto impressa pela tecnologia SLM(AU)

Research status of additives related to platelet preservation / 中国输血杂志

Platelets play an important role in hemostasis, inflammation, tumor metastasis, wound healing and defense response, but its routine storage requires a specific temperature and the storage time is generally limited to 5 ~7 d, at the same time, platelet storage damage and bacterial breeding will limit its storage time. In addition, routine transfusion can cause serious adverse reactions such as non-hemolytic fever, allergies, circulatory overload, and transfusion-related acute lung injury. These limit the clinical application of platelet products. However, additives associated with platelet preservation can reduce the likelihood of their occurrence. Therefore, this article reviews the research status of additives related to platelet preservation in recent years, as well as improving platelet storage damage and improving platelet preservation characteristics.

Effects of environmental factors on the death of cardiovascular and cerebrovascular diseases during the high temperature process in Wuhan in 2014-2019 / 公共卫生与预防医学

Objective To explore the impact of temperature and environmental factors on the risk of deaths from cardiovascular and cerebrovascular diseases (CVD) in Wuhan during the course of high temperature. Methods The daily CVD death data and meteorological and atmospheric pollutant concentration data during the high temperature process in Wuhan from 2014 to 2019 were collected. The generalized additive models (GAM) were used to obtain the characteristics of meteorological factors, atmospheric pollutant concentrations, high impact factors and thresholds affecting the relative risk of CVD death. Results The analysis results showed that: (1) When the maximum temperature reached 36.7°C and the lowest temperature reached 25.3°C, the relative risk of CVD death increased significantly; (2) The risk of CVD death during the first high temperature process was the largest, and the average CVD excess mortality rate during the first high temperature process from 2014 to 2019 reached 21.7%; and (3) The average temperature, maximum temperature and PM10 during the course of high temperature were important environmental factors that increased the risk of CVD deaths, and the relative risks were 1.14 (95% confidence interval (95% CI): 1.11-1.17), 1.11 (95% confidence interval (95% CI): 1.08-1.15, and 1.06 (95% confidence interval (95% CI): 1.02-1.09), respectively. Conclusion Temperature and PM10 are important environmental factors that increase the risk of death from CVD during the high temperature process in Wuhan from 2014 to 2019, with the first annual high temperature process having the greatest impact on the risk of CVD death.

Interaction between hyperuricemia and gender on dyslipidemia in the elderly / 中华健康管理学杂志

Objective:To explore the interaction between hyperuricemia and gender on dyslipidemia in the elderly.Methods:A cross-sectional study. The permanent residents aged≥65 years in Kunshan City were selected by the cluster sampling method. The selected residents underwent physical examination and blood biochemical tests such as blood glucose, blood lipid, uric acid, hyaluronic acid, gamma glutamyltransferase and creatinine, and history of schistosomiasis infection was investigated. Multivariate logistic regression analysis was used to analyze the relationship between various factors and dyslipidemia. Synergy index (S), relative excess risk of interaction (RERI) and the attributable proportion due to interaction (AP) were used to evaluate the association between hyperuricemia and female interaction on dyslipidemia.. The dose-response relationship between serum uric acid level and dyslipidemia was analyzed by a restricted cubic spline regression model.Results:The prevalence of dyslipidemia in the elderly aged 65 years and obove was 31.9% (1 450/4 536), and it was 23.7% (517/2 180) and 39.6% (933/2 356) in men and women, respectively ( χ2=131.38, P<0.001). Multivariate regression showed that female, high waist circumference, overweight and obesity, hypertension, diabetes, low glomerular filtration rate, high gamma-glutamyltranspeptidase, high uric acid to creatinine ratio, low neutral to lymphocyte ratio were associated with dyslipidemia (all P<0.05). Additionally, additive interaction association was found between the dyslipidemia and advanced uric acid levels ( OR=1.09, 95% CI: 1.07-1.12) and female ( OR=1.12, 95% CI: 1.11-1.14), and the contribution rate of interaction effects was 19.8% (RERI=0.74, 95% CI: 0.06-1.42; AP=0.20, 95% CI: 0.04-0.36, S=1.37, 95% CI: 1.02-1.84). Non-linear dose response relationship was identified by the restricted cubic spline regression model between the continuously rising serum uric acid and dyslipidemia ( χ2=101.23, P<0.001). Conclusions:The proportion of dyslipidemia in elderly permanent residents is high. Demographics and physical measurement indicators comprehensively affected the prevalence of dyslipidemia. In addition, both hyperuric acid and female have additive interaction on dyslipidemia.

Satellite and historical data, and statistical modeling to predict potential fishing zones for dolphinfish, Coryphaena hippurus (Perciformes: Coryphaenidae) in Colombian Pacific / Datos satelitales e históricos, y modelado estadístico, para predecir zonas de pesca potencial del pez dorado, Coryphaena hippurus (Perciformes: Coryphaenidae) en el Pacífico colombiano

Introduction: The prediction of potential fishing areas is considered one of the most immediate and practical approaches in fisheries and is an essential technique for decision-making in managing fishery resources. It helps fishermen reduce their fuel costs and the uncertainty of their fish catches; this technique allows to contribute to national and international food security. In this study, we build different combinations of predictive statistical models such as Generalized Linear Models and Generalized Additive Models. Objective: To predict the spatial distribution of PFZs of the dolphinfish (Coryphaena hippurus L.) in the Colombian Pacific Ocean. Methods: We built different combinations of Generalized Linear Models and Generalized Additive Models to predict the Catch Per Unit Effort of C. hippurus captured from 2002 to 2015 as a function of sea surface temperature, chlorophyll-a concentration, sea level anomaly, and bathymetry. Results: A Generalized Additive Model with Gaussian error distribution obtained the best performance for predicting PFZs for C. hipurus. Model validation was performed by calculating the Root Mean Square Error through a cross-validation approach. The R2 of this model was 50 %, which was considered suitable for the type of data used. January and March were the months with the highest Catch per Unit Effort values, while November and December showed the lower values. Conclusion: The predicted PFZs of C. hippurus with Generalized Additive Models satisfactorily with the results of previous research, suggesting that our model can be explored as a tool for the assessment, decision making, and sustainable use of this species in the Colombian Pacific Ocean.

Introducción: La predicción de zonas potenciales de pesca se considera uno de los enfoques más inmediatos y efectivos en las pesquerías, es una técnica importante para la toma de decisiones en el manejo de los recursos pesqueros. Ayuda a los pescadores a reducir su costo de combustible y también a disminuir la incertidumbre de sus capturas, esta técnica permite contribuir a la seguridad alimentaria nacional e internacional. En este estudio, se construyeron diferentes combinaciones de modelos estadísticos predictivos como modelos lineales generalizados y modelos aditivos generalizados. Objetivo: predecir la distribución espacial de las zonas potenciales de pesca del pez dorado (Coryphaena hippurus L.) en el Pacífico colombiano. Métodos: La variable de respuesta se expresó en escala de captura por unidad de esfuerzo, es decir, el número de individuos de C. hippurus capturados por un número total de anzuelos disponibles entre 2002 y 2015. Temperatura de la superficie del mar, concentración de clorofila, anomalía del nivel del mar y batimetría, se utilizaron como variables explicativas para los meses de estacionalidad de C. hippurus (noviembre - marzo). Resultados: El modelo con mejor rendimiento para la predicción de zonas potenciales de pesca fue un modelo aditivo generalizado con distribución de error gaussiana y función de enlace de registro, que se seleccionó en función del criterio de información de Akaike, el R2 y la desviación explicada. La validación del modelo se realizó calculando el error cuadrático medio a través de un enfoque de validación cruzada. El ajuste de este modelo fue del 50 %, lo que puede considerarse adecuado para el tipo de datos utilizados. Enero y marzo fueron los meses con mayor captura por unidad de esfuerzo y noviembre-diciembre los meses con menor. Conclusión: Las zonas potenciales de pesca previstas coincidieron satisfactoriamente con investigaciones anteriores, lo que sugiere que nuestro modelo es una herramienta poderosa para la evaluación, toma de decisiones y uso sostenible de los recursos pesqueros de C. hippurus en el Pacífico colombiano.

Perspectivas do uso de extratos de plantas amazônicas (açaí, copaíba, salva-do-marajó, pupunha e bacuri) como potenciais moduladores da fermentação ruminal: um breve panorama / Perspectives on the use of extracts from Amazonian plants and fruits (açai, copaiba, salva-do-marajo, pupunha and bacuri) as potential modulators of ruminal fermentation: a brief overview / Perspectivas del uso de extractos de plantas y frutos amazónicos (açaí, copaíba, salva-do-marajó, pupunha y bacuri) como potenciales moduladores de la fermentación ruminal: un breve panorama

Resumo Na flora amazônica, incontáveis plantas possuem compostos bioativos, que potencialmente podem ser utilizados como moduladores da fermentação ruminal. Apesar da importância, poucos estudos têm sido desenvolvidos para avaliar a utilização de plantas amazônicas como aditivos alimentares naturais na nutrição de ruminantes. Assim, objetiva-se apresentar um panorama dos dados científicos da literatura sobre os efeitos do uso dos extratos de açaí, copaíba, salva-do-marajó, pupunha e bacuri na fermentação ruminal e os seus potenciais de utilização na dieta de ruminantes. O açaí (Euterpe oleracea Mart.), possui 16,08 mg/g de matéria seca de flavonoides, compostos com potente ação antimicrobiana. Estudos com suplementação do óleo de açaí tem mostrado efeitos modulatórios na fermentação ruminal e na produção de leite de ovelhas e vacas. Adicionalmente, a oleoresina de copaíba (Copaifera spp.) e a manteiga das sementes de bacuri (Platonia insignis Mart.), possuem, respectivamente, 88% e 41% de terpenos; a composição fitoquímica do óleo de salva-do-marajó (Hyptis crenata Pohl ex Benth) ainda não está completamente caracterizada, mas esta fonte está majoritariamente composta por terpenos cânfora (33,62%), 1,8-cineol (19,76%) e α-pineno (15,24%), que apresentam atividade in vitro antimicrobiana, capaz de reduzir a produção total de gás em ambiente ruminal in vitro. A pupunha, fruto da pupunheira (Bactris gasipaes Kunth.), possui 355,95 mg/kg de carotenoides, com efeito antimicrobiano in vitro contra algumas cepas bacterianas. Os achados desta revisão demonstram as potencialidades dos extratos amazônicos na maximização da produção animal, em razão dos possíveis efeitos na modulação da fermentação ruminal, sendo encorajada a realização de estudos adicionais visando uma maior exploração deles. Embora, atualmente, não existam estudos associados aos efeitos do açaí, salva-do-marajó, pupunha e bacuri na fermentação ruminal, pressupõe-se que pela sua composição fitoquímica, poderiam ter um efeito semelhante aos ionóforos na produção de ruminantes.

Abstract In the Amazonian Forest, diverse plants have bioactive compounds, which can potentially be used as modulators of ruminal fermentation. Despite the importance, few studies have been developed to evaluate the use of extracts from Amazonian plants as natural feed additives in ruminant nutrition. Thus, the objective of this study is to present a brief overview of the scientific data in the literature regarding the effects of the use of extracts of açaí, copaíba, sage-do-marajó, peach palm, and bacuri on the ruminal fermentation and their potential for use in the diet of ruminants. Açaí (Euterpe oleracea Mart.) has 16.08 mg/g of dry matter of flavonoids, compounds with potent antimicrobial activity. Studies with açaí oil supplementation have shown modulatory effects on rumen fermentation and milk production in sheep and cows. Additionally, the copaiba oleoresin (Copaifera spp.) and the bacuri (Platonia insignis Mart.) seed butter have 88% and 41% of terpenes, respectively; the phytochemical composition of marajó sage oil (Hyptis crenata Pohl ex Benth) is not completely resolved, but this source is mostly composed of the terpenes, camphor (33.62%), 1,8-cineole (19.76%) and α-pinene (15.24%), which have in vitro antimicrobial effects against different bacterial strains. The findings of this review demonstrate the potential of Amazonian extracts in maximizing animal production, due to the possible effects on the modulation of ruminal fermentation, being encouraged to carry out additional studies aiming at a greater exploration of them. Although, there are no current studies associated with the effects of açaí, sage, peach palm, and bacuri on rumen fermentation, it is inferred that, due to their phytochemical composition, they may have a similar effect to ionophores on ruminant production.

Resumen En la selva amazónica, innumerables plantas poseen compuestos bioactivos, que potencialmente pueden ser utilizados como moduladores de la fermentación ruminal. A pesar de la importancia, han sido desarrollados pocos estudios evaluando el uso de extractos de plantas amazónicas como aditivos alimentarios naturales en la nutrición de rumiantes. Así, el objetivo de este estudio es presentar un breve panorama de los datos científicos en la literatura sobre los efectos del uso de extractos de açaí, copaíba, salvia-do-marajó, chontaduro y bacuri en la fermentación ruminal y su potencial de uso en la dieta de los rumiantes. Açaí (Euterpe oleracea Mart.) tiene 16,08 mg/g de materia seca de flavonoides, compuestos con potente acción antimicrobiana. Los estudios con suplementos de aceite de açaí han demostrado efectos moduladores sobre la fermentación ruminal y la producción de leche en ovejas y vacas. Adicionalmente, la oleorresina de copaiba (Copaifera spp.) y la mantequilla de semilla de bacuri (Platonia insignis Mart.) poseen 88% y 41% de terpenos, respectivamente; la composición fitoquímica del aceite de salvia de marajó (Hyptis crenata Pohl ex Benth) no está completamente resuelta, sin embargo esta fuente está mayoritariamente compuesta de los terpenos alcanfor (33,62%), 1,8-cineol (19,76%) y α-pineno (15,24%), los cuales poseen efecto antimicrobiano in vitro frente a diferentes cepas bacterianas. Los hallazgos de esta revisión demuestran el potencial de los extractos amazónicos en la maximización de la producción animal, debido a sus posibles efectos sobre la modulación de la fermentación ruminal, siendo incentivados a realizar estudios adicionales con el objetivo de una mayor exploración de estos. Aunque actualmente no existen estudios asociados a los efectos del açaí, la salvia, el chontaduro y el bacuri en la fermentación ruminal, se supone que, por su composición fitoquímica, podrían tener un efecto similar a los ionóforos en la producción de rumiantes.

Time series analysis of air pollution and asthma outpatient visits in Hefei / 公共卫生与预防医学

Objective To explore the relationship between the outpatient visits for adult asthma and air pollution in a tertiary hospital in Hefei. Methods The number of outpatient visits for asthma in a tertiary hospital in Hefei from 2014 to 2020 was collected. The air pollutant data was obtained through the Hefei Air Monitoring Station, and the meteorological indicators of the same period were collected through the China Meteorological Network. The R statistical software was used to establish a generalized additive model to analyze the lag effect of air pollution on the number of outpatient visits for asthma. Results From 2014 to 2020, there were 7 220 asthma outpatients in the tertiary hospital in Hefei, including 3104 males and 4 116 females, 3 798 patients in warm season, and 3 422 patients in cold season. During the period, the average concentrations of SO2, NO2, CO, O3, PM10, and PM2.5 were 11.9μg/m3, 40.1μg/m3, 0.9 mg/m3, 87.3μg/m3, 81.3μg/m3, and 55.7μg/m3, respectively. The results of the single-pollutant model showed that every 10μg/m3 increase in SO2 concentration increased the risk of asthma by 0.74% (95%CI: 0.22%-1.29%), and the effect was the greatest on Lag2 day. NO2 increased the risk of asthma by 0.31% (95%CI: 0.13%-0.49%), with the greatest effect on Lag0 day. The analysis of the dual pollutant model found that whereas the effect of SO2 decreased after the incorporation of NO2, the effect increased after the incorporation of CO, O3, PM10, or PM2.5, respectively. The effect of NO2 on asthma decreased after the incorporation of SO2, whereas the effect on asthma increased after the inclusion of CO, PM10, or PM2.5. Stratified analysis of cold and warm seasons showed that the effect of NO2 on asthma was the greatest in lag0 in cold season. The effect of SO2 was higher in cold season than in warm season, and it was the highest in lag2. The gender stratification analysis showed that the effects of SO2 and NO2 on male asthma were higher than those on females. Conclusion From 2014 to 2020, the increase of SO2 and NO2 concentrations in Hefei is positively correlated with the risk of asthma in the outpatient department of a tertiary hospital. The effect has a certain lag. It is of great significance to formulate relevant preventive measures for the occurrence and attack of asthma.

Effects of daily mean temperature and other meteorological variables on bacillary dysentery in Beijing-Tianjin-Hebei region, China

BACKGROUND@#Although previous studies have shown that meteorological factors such as temperature are related to the incidence of bacillary dysentery (BD), researches about the non-linear and interaction effect among meteorological variables remain limited. The objective of this study was to analyze the effects of temperature and other meteorological variables on BD in Beijing-Tianjin-Hebei region, which is a high-risk area for BD distribution.@*METHODS@#Our study was based on the daily-scale data of BD cases and meteorological variables from 2014 to 2019, using generalized additive model (GAM) to explore the relationship between meteorological variables and BD cases and distributed lag non-linear model (DLNM) to analyze the lag and cumulative effects. The interaction effects and stratified analysis were developed by the GAM.@*RESULTS@#A total of 147,001 cases were reported from 2014 to 2019. The relationship between temperature and BD was approximately liner above 0 °C, but the turning point of total temperature effect was 10 °C. Results of DLNM indicated that the effect of high temperature was significant on lag 5d and lag 6d, and the lag effect showed that each 5 °C rise caused a 3% [Relative risk (RR) = 1.03, 95% Confidence interval (CI): 1.02-1.05] increase in BD cases. The cumulative BD cases delayed by 7 days increased by 31% for each 5 °C rise in temperature above 10 °C (RR = 1.31, 95% CI: 1.30-1.33). The interaction effects and stratified analysis manifested that the incidence of BD was highest in hot and humid climates.@*CONCLUSIONS@#This study suggests that temperature can significantly affect the incidence of BD, and its effect can be enhanced by humidity and precipitation, which means that the hot and humid environment positively increases the incidence of BD.

Research on prediction of daily admissions of respiratory diseases with comorbid diabetes in Beijing based on long short-term memory recurrent neural network / 浙江大学学报·医学版

To compare the performance of generalized additive model (GAM) and long short-term memory recurrent neural network (LSTM-RNN) on the prediction of daily admissions of respiratory diseases with comorbid diabetes. Daily data on air pollutants, meteorological factors and hospital admissions for respiratory diseases from Jan 1st, 2014 to Dec 31st, 2019 in Beijing were collected. LSTM-RNN was used to predict the daily admissions of respiratory diseases with comorbid diabetes, and the results were compared with those of GAM. The evaluation indexes were calculated by five-fold cross validation. Compared with the GAM, the prediction errors of LSTM-RNN were significantly lower [root mean squared error (RMSE): 21.21±3.30 vs. 46.13±7.60, <0.01; mean absolute error (MAE): 14.64±1.99 vs. 36.08±6.20, <0.01], and the value was significantly higher (0.79±0.06 vs. 0.57±0.12, <0.01). In gender stratification, RMSE, MAE and values of LSTM-RNN were better than those of GAM in predicting female admission (all <0.05), but there were no significant difference in predicting male admission between two models (all >0.05). In seasonal stratification, RMSE and MAE of LSTM-RNN were lower than those of GAM in predicting warm season admission (all <0.05), but there was no significant difference in value (>0.05). There were no significant difference in RMSE, MAE and between the two models in predicting cold season admission (all >0.05). In the stratification of functional areas, the RMSE, MAE and values of LSTM-RNN were better than those of GAM in predicting core area admission (all <0.05). has lower prediction errors and better fitting than the GAM, which can provide scientific basis for precise allocation of medical resources in polluted weather in advance.

Finite Element Analysis on Treatment Effect of Additive Manufacturing Scoliosis Orthosis / 医用生物力学

Objective To evaluate the efficacy of additive manufacturing scoliosis orthosis, by simulation on interaction of the bone, trunk and orthosis using finite element method. Methods Combined with CT data of the patients, three-dimensional (3D) scanning model of the trunk and full length X-ray of the spine, the bone-trunk-orthosis finite element model was established and proved to be effective. The change and development trend of Cobb angle of the main thoracic scoliosis was calculated under different boundary and load conditions. Results The treatment effect of the additive manufacturing scoliosis orthosis was good. With the increase of orthotic preload, the improvement of Cobb angle and pelvic tilt was more obvious. The Cobb angle was expected to decrease by 6.18° after application of 70 N preload to the orthosis for 6 months. In the case of increasing system stiffness, Cobb angle improvement was not obvious and became even worse. Conclusions Additive manufacturing scoliosis orthosis is effective for treating adolescents with immature bones, while for patients with mature or degenerative bones, its treatment effect is poor.